Mediums

Click here for Wicked Color Sets and Mediums

When using additives, always mix thoroughly and be aware
that some changes in spray consistency may occur.

Createx Airbrush Cleaner
A must for any airbrush artist. The most common danger to the smooth operation of your airbrush is improper cleaning. Createx Airbrush Cleaner effectively removes dried color from all internal parts and bottle assemblies without leaving any residue. A special lubricant is formulated into the cleaner to help prevent pigment build-up on the needle and tip. To refurbish a dirty airbrush remove the handle and allow the whole airbrush soak overnight. Cleaner may be diluted with one part water to one part cleaner for normal maintenance.

AB 5618: Airbrush Cleaner - click to order:

Airbrush Restorer - Safely dissolves hardened and dried acrylic and enamel paint from neglected airbrushes. Rejuvenates O-rings and teflon packing. Restorer is reusable, non-toxic, biodegradable, non-flammable and low vapor. Directions: Submerse the airbrush for 1-2 hours then rinse and spray with clean water.

AB 5619: Airbrush Restorer - click to order
Matte Top Coat – On most surfaces it provides a water proof crystal clear matte finish with UV protectants which remains flexible soft and will not crack or discolor. When sprayed lightly, it will remain somewhat supple to the touch when used on fabrics. However, transparent base is the recommended “Top Binder” to spray over your completed fabric design.
AB 5603: Matte Top Coat - click to order
Gloss Top Coat – Same as above on most surfaces, except not recommended for use on fabrics (does not remain as supple to the touch) and it will dry to a gloss finish.
AB 5604: Gloss Top Coat - click to order

Opaque Base – Add to colors to reduce color values or to increase opacity (It may negate the special effects characteristics of certain colors.) Add small amounts to color until desired result is achieved (up to 25%). :

AB 5602: Opaque Base - click to order

Transparent Base – Add to lighten colors and to increase their transparency (add small amounts to color until desired results are achieved (up to 25%). Transparent Base is an excellent “Top Binder” when sprayed over your completed t-shirt design—It remains soft and supple to the touch and improves the washfastness of your completed design.

AB 5601: Transparent Base - click to order

Retarder Medium – An additive designed to slow the drying time of Createx Colors. Generally, this product is not required and not recommended in other than extreme conditions (i.e., extremely hot conditions). When used in very small increments (1 - 2 drops per 4 oz of color) it can also enhance flow and help prevent paint drying in the tip of the airbrush. Mix thoroughly.

AB 5607: Retarder Medium - click to order
Illustration Base:
AB 5608: Illustration Base - click to order
 

Createx Sets
 Createx Mediums
Iridescent colors
Createx Main Page
Pure Pigments
Wicked
Colors

e-mail us: click here