4500 SERIES SPARKLESCENT COLORS SET INSTRUCTIONS

Sets are designed to use Sparklescent Colors as a mid-coat over a color-keyed base for improved coverage and easier application. Color-keyed base allows Sparklescent Color to cover with less material required than over a white base.

Small sets contain enough material to paint a motorcycle and a small car. Large sets contain enough material to paint an average to large-sized vehicle. Refer to Auto Air Application Guide for further information. Auto Air Technical Support is available at (860) 653.5505 or techsupport@autoaircolors.com.

Mango (Set #s 4970, 4971), Tequila Yellow (4974, 4975), Rock Star Red (4980, 4981) Sets

1. Start with a tinted sealer made by mixing 4001 Sealer White with approximately 15% 4200 Series Semi-Opaque Color. Reduce mixture 10% with 4011 Flash Reducer. After curing, dry sand smooth using 600 – 800 grit paper to remove any surface roughness.

2. Apply the 4200 Series Semi-Opaque Colors as the base color over the tinted sealer. Reduce 10% with 4011 Flash Reducer. Allow colors to dry.

3. Apply Sparklescent Color as a mid-coat over color keyed base. Reduce 10% with 4011 Flash Reducer. Apply lightly, avoid wetted coats and building up material in excess.

4. After curing, top coat colors with a durable, clear. We recommend a catalyzed, 2-part urethane clear for an automotive finish.

Electric Green (4972, 4973), Toxic Green (4976, 4977) Porn Star Pink (4978, 4979), Real Teal (4982, 4983), Fine

Wine (4986, 4987) Sets

1. Start with a tinted sealer made by mixing 4001 Sealer White with approximately 2:1 with 4200 Series Transparent Color. Reduce mixture 10% with 4011 Flash Reducer. After curing, dry sand smooth using 600 – 800 grit paper

to remove any surface roughness.

2. Apply Sparklescent Color as a mid-coat over color keyed base. Reduce 10% with 4011 Flash Reducer. Apply lightly, avoid wetted coats and building up material in excess.

3. After curing, top coat colors with a durable, clear. We recommend a catalyzed, 2-part urethane clear for an automotive finish.

Nightmare Blue (4984, 4985), Blizzard Blue (4990, 4991), Cool Chromatic Gold (4901, 4902) &

Radberry (4903, 4904) Sets

1. Start with a 4000 Series reduced 10% with 4011 Flash Reducer. After curing, dry sand smooth using 600 – 800 grit paper to remove any surface roughness.

2. Apply the 4300 Series Colors as the base color. Reduce 10% with 4011 Flash Reducer. Allow colors to dry.

3. Apply Sparklescent Color as a mid-coat over color keyed base. Reduce 10% with 4011 Flash Reducer. Apply lightly, avoid wetted coats and building up material in excess.

4. After curing, top coat colors with a durable, clear. We recommend a catalyzed, 2-part urethane clear for an automotive finish.

Bada Bling Silver Set (4988, 4989)

1. Mix 4001 & 4001 Sealer White & Dark to make a medium grey sealer base. Reduce grey sealer mix 10% with 4011 Flash Reducer.

2. Mix 4332 Metallic Silver 2:1 4590 Bada Bling Silver. Reducer silver mixture 10% 4011 Flash Reducer. Best applied in a cross-hatched pattern to achieve a random, well-spaced orientation.

3. After curing, top coat colors with a durable, clear. We recommend a catalyzed, 2-part urethane clear for an automotive finish.