header.php




Iwata Hoses, Manifolds, Etc

Hoses

Iwata BT 010 Braided Air Hose

Constructed for durability, this brightly colored nylon braided hose is the ideal air hose for use with all Iwata Airbrushes. The Female coupling at the airbrush end is designed for Iwata Airbrush Only. With a 1/4" Female Compressor Fitting on the other end.

Iwata BT010 Braided Hose
10 ft. braided nylon airhose for use with Iwata Airbrushes
94 BT010: 10 ft. braided nylon airhose


Iwata BT 050 Braided Air Hose

Constructed for durability, this brightly colored nylon braided hose is the ideal air hose for use with all Iwata Spray Guns Only (RG-2 ,W-100). the Female coupling at the airbrush end is a 1/4" coupling designed for Iwata Spray Guns Only (RG-2, W100) Only. With a 1/4" Female Compressor Fitting on the other end.

Iwata BT050 Braided Hose
10 ft. braided nylon airhose 1/4" to 1/4" for Iwata Spray Guns Only (for W-100 and RG-3)
94 BT050: 10 ft. braided nylon airhose 1/4"-1/4"


CT I10 Cobra Coil Airhoses

Made of strong polyurethane for use with all Iwata airbrushes. Unique in its design because it recoils out of the way when not in use. The Female coupling at the airbrush end is designed for Iwata Airbrush Only. With a 1/4" Female Compressor Fitting on the other end.

Iwata CTI10 Cobra Coil Hose
10 ft. cobra coil airhose for Iwata Airbrushes Only
94 CTI10: 10 ft. cobra coil airhose
10 ft. cobra coil airhose for Iwata Spray Guns - RG-2 ,W-100
94 CTI10RG: 10 ft. cobra coil airhose for RG-2 ,W-100



Iwata DT I10 Straight Shot Airhose

Made of polyurethane, which is 1/3 the weight and twice the strength of traditional vinyl air hose Available in 10' With The Female coupling at the airbrush end is designed for Iwata Airbrush Only. With a 1/4" Female Compressor Fitting on the other end.

Iwata DTI10 Straight Shot Hose

10 ft. straight shot airhose for Iwata Airbrushes Only
94 DTI10: 10 ft. straight shot airhose


Iwata Adapters for Iwata Hoses

Adapters to connect Badger & Paasche Airbrush's to Iwata Hoses


Iwata Adapters for Iwata Hoses
Adapter (Iwata airbrushes to Paasche airhose)
94 J001: Adapter (Iwata airbrushes to Paasche airhose)
Adapter (Iwata airbrushes to Badger airhose)
94 J002: Adapter (Iwata airbrushes to Badger airhose)
Adapter Set (Iwata airbrushes to Badger, Paasche, Aztek airhose)
94 J003: Adapter Set (Iwata airbrushes to Badger airhose)


Iwata Quickfit Quick Disconnect Adapter

NEW Quick Disconnect Set (Iwata airbrushes and hoses only)
Converts Iwata hoses to Quick Disconnect in seconds. Just thread onto your Iwata hose! No cutting.
Comes with male adapter.


Iwata Quick Disconnect
Quick Disconnect Set w/Male Adaptor
(for Iwata Hose only)
94 I1603 Q.D. Set, thread-on
Quick Disconnect Male Adaptor for above,
(for Iwata Hose only)
94 I1604 Additional Male Q.D. fittings




Manifolds & Fittings

Manifolds



Iwata Manifolds

2 Brush Manifold w/Valves
94 012004, 2 Brush Manifold w/Valves
3 Brush Manifold w/Valves
94 012005, 3 Brush Manifold w/Valves


Manifold Fittings

Iwata Maifold Fittings
1/4" Male to 1/4"Male Coupling
94 012 001, 1/4" Male to 1/4" Male Coupling
1/4" Male to 1/4" Female Coupling
94 012 002, 1/4" 1/4 Male to 1/4 Female Coupling
1/4" On or Off Valve Assemble
94 012 003, 1/4" On/Off Valve Assemble
1/4" Female to 1/4" Female Coupling
99 012 013, 1/4" Female to 1/4" Female Coupling


Iwata Regulators

Iwata Regulators

F A600DH Iwata Moisture Filter/Regulator

Essential for optimizing the performance of both the compressor and the airbrush. Attach either directly to the air source or can be placed inline between two airhoses. A high-quality 5-micron filter is used to remove any potential moisture particles. Consists of Regulator, Gauge (see F A700DH below, Moisture Filter ( See F A500DH below) adapters and teflon tape. With Standard 1/4" fittings

Iwata Moisture Filter/Regulator
94 F A600DH Moisture Filter, Regulator and Gauge

F A500DH Iwata Moisture Filter

Optimize performance of both the compressor and airbrush. A high-quality 5-micron filter is used to remove any potential moisture particles. Includes adapters and Teflon tape. With Standard 1/4" fittings.

Iwata Moisture Filter
94 F A500DH Iwata Moisture Filter

F A700DH Iwata Pressure Regulator & Gauge

Regulator and pressure gauge, Piston type pressure regulator. Gauge displays 0-100 psi incremented by 2 psi marks, consists of Regulator, Gauge, Adapters and Teflon tape. With Standard 1/4" fittings

Iwata Pressure Regulator & Gauge
94 F A700DH Pressure Regulator & Gauge

Iwata FA450 Pistol-Grip Filter

F A450 Iwata Pistol-Grip Filter

Attaches directly onto the Iwata airbrush, this filter is the final defense to deliver clean, dry air to your airbrush. miniature in size, the super-fine 5-micron filter element performs like a full-size filter separator, Clear filter bowl allows a visual inspection of built-up moisture and is evacuated through a spring loaded release valve - without taking the filter off the airbrush. comfortable in the hand, acts as a handle on the airbrush to relieve muscle tension. Fits all Iwata airbrushes only

Iwata Pistol-Grip Filter
94 F A450 Iwata Pistol-Grip Filter


Teflon Tape

Iwata Teflon Tape

Teflon Tape 1/2" x 260"
94 012012, Teflon Tape 1/2" x 260"





Airbrush Home
Order InformationReview Cart
E-Mail Us

Dixie Art & Airbrush LLC • 5440 Mounes St., Suite 108 • New Orleans, LA 70123
1-800-783-2612 • 504-733-6509 • 504-733-0668 FAX • artdixie@aol.com

© Dixie Art & Airbrush, LLC 2016
Formerly Dixie Art Supplies, Inc